Heller used machine with Low Cost Infrared Heller SMT Reflow Soldering Oven PCB SMD Hot Air Industrial
Production Overview:
The 1505 MK5 from Heller Industries Inc is a Reflow Soldering Equipment with Heating Zone Length 200 mm. More details for 1505 MK5 can be seen below.
With its features increases productivity, this 5 zone reflow oven improves quality and reduces costs:
- Small footprint - overall length (200 cm) of this reflow oven is similar size to benchtop reflow machines but is IN-LINE for maximum throughput!
- 5 heated zones -allows for more precise profile definition than lab machines. Profiles can be sculpted for minimal liquid time of reflow.
- Full convection heating top and bottom - gives the lowest ΔT across your PCB.
- 20 inch max PCB width - the model 1505 reflow oven can process the largest PCBs of any system in its class.
- The 1505 reflow oven can produce profiles similar to larger mass
Technical Parameters:
| Model |
1505 MK5 (Air) |
| Electric Supply |
| Power Input (3 Phase) Standard |
480 volts |
| Breaker Size |
100 amps @ 480v |
| kW |
7 - 12 Continuous |
| Typical Run Current |
20 - 30 amps @ 480v |
| Optional Power Inputs Available |
208/240/380/400/415/440/480 VAC |
| Frequency |
50/60 Hz |
| Sequential Zone Turn On |
S |
| Dimensions |
| Overall Oven Dimensions |
79" (200cm) L x 55"(140cm) W x 63" (160cm) H |
| Typical Net Weight |
2866 lbs. (1300kg) |
| Typical Shipping Weight |
3527 lbs. (1600kg) |
| Typical Shipping Dimension |
91" x 73" x 77" |
| Computer Control |
| AMD or Intel Based Computer |
S |
| Flat Screen Monitor w/Mount |
S |
| Windows Operating System |
Windows 10 Home |
| Auto Start Software |
S |
| Data Logging |
S |
| Password Protection |
S |
| LAN Networking |
O |
| Inert Atmosphere |
| Minimum PPM Oxygen |
- |
| Waterless Cooling w/ Flux |
- |
| Separation System |
- |
| Nitrogen On/Off Valve |
- |
| Oxygen Monitoring System |
- |
| Nitrogen Standby System |
- |
| Typical Nitrogen Consumption |
- |
| Additional Features |
| KIC Profiling Software |
S |
| Signal Light Tower |
S |
| Powered Hood Lift |
S |
| Five (5)Thermocouple Profiling |
S |
| Redundant Alarm Sensors |
O |
| Intelligent Exhaust System |
O |
| KIC Profiler / ECD Profiler |
O |
| Center Board Support |
O |
| Board Drop Sensor |
O |
| Board Counter |
O |
| Bar Code Reader |
O |
| Custom Paint & Decal |
O |
| Battery Backup for Conveyor and PC |
O |
| GEM/SECS Interfacing |
O |
| Mesh Belt Conveyor |
| Height From Floor |
36.2" ± 2.4" (92 cm ± 6 cm) |
| Maximum PCB Width |
22" (56 cm) |
| Space Required Between PCB's |
0.0" (0.0 cm) |
| Conveyor Length On-Load |
|
| Conveyor Length Off-Load |
|
| Heated Tunnel Length |
56.3" (143 cm) |
| Process Clearance Above Mesh Belt |
2.3" (5.8 cm) |
| Mesh Belt Pitch |
0.5" (1.27 cm) |
| Maximum Conveyor Speed |
74"/Min (188 cm/min.) |
| Conveyor Direction Left to Right |
S |
| Conveyor Direction Right to Left |
O |
| Conveyor Speed Control |
Closed Loop |
| Edge Hold Conveyor System Option |
| Height from Floor - Standard |
37.8" + 2.4" (96 cm + 6 cm) |
| Height from Floor - Optional |
- |
| Clearance Above & Below Conveyor Pins |
1.15" (2.9 cm) |
| Length of PCB Support Pins |
.187" (4.75 mm) |
| 3 mm long support pins |
O |
| Minimum/Maximum Board Width |
2" - 22" (5 - 56 cm)
24" (61cm) Optional* |
| Power Width Adjustment |
S |
| Computer Controlled Width Adjust |
O |
| Auto Lubrication System |
S |
| Forced Convection Zones |
| Top & Bottom |
5 |
| Heater Type |
Instant response open coil |
| Heater Material |
Nichrome |
| Profile Change Time |
5 - 15 minutes |
| Temperature Control |
| Accuracy of Temperature Controller |
± .1°C |
| Cross-Belt Temperature Tolerance |
± 3.0°C |
| Heater Wattage Per Zone |
5400 w** |
| Temperature Range Standard |
60-350°C |
| Cooling Systems |
| Number of Cooling Zones Standard |
1 |
| Additional Cooling Zones |
O |
| Water Cooling |
- |
| Notes: |
S = Standard, O = Optional. |
Company information:
HTGD (GDK) is committed to take the professional line, to enrich the SMT professional and technical service experience, process improvement and effective solutions, rich practical experience to provide customers with appropriate and economical and reliable recommendations to meet the special needs of all types of customers. The company established a head office in Shenzhen and set up branch offices in Dongguan, Suzhou, Tianjin, Chongqing, Xi'an and Xiamen. At the same time, there are many branches and agents overseas, forming a strong distribution and service network in the world.
Major application range is SMT & PCB assembly, consumer electronics products, auto industry, LED assembly, medical electronics industry, etc.
# Research and development Full automatic screen printer start in 2008
# In 2011, HETIANGOOD company was formally registered and establised
# 15 years experiences in SMT industry.
# 200+ empolyees, 2000 sets machine capability each year. (HTGD, GDK brand), ISO certified company, CE approval for the machine.
# Office area of 8000 square meters, modern, concise, rich sense of science and technology
Production line:
10000 square meters standard modern standard precision equipment production work
After-Sales service:
Technical support
# From the purchase date, one year free warranty, lifelong maintenance
# Provide technical update and technical service at any time
# Software system life - long free upgrade, to ensure the latest version of the software and perfect functions
# Provide technical training according to customer needs
Service support
# Since the date of purchase, the customer has become a lifetime member of our company and enjoys the all-day waiting service
# Make phone calls and on-site visits to customers from time to time, communicate with customers and improve related problems in a timely manner
# Provide door-to-door service, one - on - one designated service policy
Advantage, Why choose us:
1. GDK,HTGD Self-branded famous manufacture around the world
2. Self developed and owned software, Company industry experience
3. 2000 sets production capability per year
4. CE,ISO,TUV certified company
5. We have many years of SMT sales, installation and after-sales service experience.
6. We have exported the whole line of SMT equipment in Russia, Iran, Vietnam, Malaysia and other countries. Many of them are new customers starting from scratch.
7. We assist customers to train professional technicians and provide technical support at any time.
8. We solve all SMT problems for our customers.
Partial Certificate of Honor:
SMT whole line support
We provide SMT equipment and solutions for the whole line.
Other Products support:
Customer size:
Customer visited factory:
Our activity high light part:
Packing: VACUMME +WOODEN BOX.
------------FAQ----------------------------------------------------
Q: What we can do for you?
A: Total SMT Machines and Solution, professional Technical Support and Service.
Q:Are you a trade company or a manufacturer?
A: OEM & ODM service are available.
Q: What is your delivery date?
A: The delivery date is about 35 days after receipt of payment.
Audited Supplier 
){kind=link}