| Customization: | Available |
|---|---|
| Transmission Type: | One Stage Orbit |
| Rhythm: | Flow Production Line |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| PCB parameters | |
| Maximum board size(X x Y) | 450mm x 350mm |
| Minimum board size(X x Y) | 50mm x 50mm |
| PCB thickness | 0.4mm~6mm |
| Warpage | ≤1%Diagonal |
| Maximum board weight | 3Kg |
| Board margin gap | Configuration to 3mm |
| Maximum bottom gap | 20mm |
| Transfer speed | 1500mm/s(Max) |
| Transfer height from the ground | 900±40mm |
| Transfer orbit direction | Left-Right,Right-Left,Left-Left,Right-Right |
| Transfer mode | One stage orbit |
| PCB damping method | Programmable flexible side pressure + Adaptive PCB board thickness + Edge lock base clamp (Optional: 1. Multipoint partial vacuum of the bottom; 2. Edge locking and substrate clamping) |
| Support method | Magnetic thimble, Equal high block,etc.(Optional:1.Vacuum Chamber;2.Special workpiece fixture) |
| Printing parameters | |
| Printing head | Floating intelligent printing head (two independent direct connected motors) |
| Template frame size | 470mm x 370mm~737 mm x 737 mm |
| Maximum printing area(X x Y) | 450mm x 350mm |
| Squeegee type | Steel scraper/Glue scraper(Angel 45°/50°/60° matching the printing process) |
| Squeegee length | 300mm(optional with length of 200mm-500mm) |
| Squeegee height | 65±1mm |
| Squeegee thickness | 0.25mm Diamond-like carbon coating |
| Printing mode | Single or double scraper printing |
| Demoulding length | 0.02 mm - 12 mm |
| Printing speed | 0 ~ 200 mm/s |
| Printing pressure | 0.5kg - 10Kg |
| Printing stroke | ±200 mm (From the center) |
| Cleaning parameters | |
| Cleaning mode | 1. Drip cleaning system; 2. Dry, wet and vacuum modes |
| Length of cleaning and wiping board | 380mm(optional with 300mm, 450mm, 500mm) |
| Image parameters | |
| Field of view | 8mm x 6mm |
| Platform adjustment range | X:±5.0mm,Y:±7.0mm,θ:±2.0° |
| Benchmark point type | Standard shape benchmark point(SMEMA standard),solder pad/openings |
| Camera system | Independent camera,upwards/downwards imaging vision system |
| Performance parameters | |
| Repetition precision of image calibration | ±10.0μm @6 σ,Cpk ≥ 2.0 |
| Repetition precision of printing | ±20.0μm @6 σ,Cpk ≥ 2.0 |
| Cycle time | <7s(Exclude printing and cleaning) |
| Product changeover | <5mins |
| Equipment | |
| Power requirements | AC220V±10%,50/60HZ,15A |
| Compressed air requirements | 4~6Kg/cm2 |
| Operating system | WIN7 |
| External dimension | 1152mm(L) x 1415mm(W) x 1540mm(H)(Without light,monitor and keyboard) |
| Machine weight | Around 1000Kg |
| Item No. | Function |
| 1 | Automatic Add solder paste |
| 2 | Paste Roll Height Monitor (aPRHM) |
| 3 | Automatic Stencil plugging check |
| 4 | SPI online function interface |
| 5 | Internal temperature and humidity detection on the work area |
| 6 | Automatic temperature and humidity control on the work area |
| 7 | MES system seamless docking |
| 8 | Squeegee pressure closed loop control feedback system |
| 9 | Automatic dispensing function |
| 10 | PCB Positioning Vacuum Cavity and Upper Press Function |
| 11 | Window 10 system |
| 11 | Upper Press Function |
| 12 | PCB Size 525 mm * 350 mm |
| 13 | PCB board support method Grid-Lock |
| 14 | Support pins or support block detection sensor |
| 15 | Stencil Detection function sensor |
| 16 | Squeegee holder |
| 17 | Magnetic squeegee |
| 18 | System of adding solder paste from cartridge Semko 6 Oz |
| 19 | Control - by touch screen monitor |
| 20 | PC must have (SSD) |
| 21 | Range of adjustment feets from 45 to 160 mm |
| 22 | 6.1 Software can save log-files 6. 2 Log-files contain data about all possible parameters of the equipment 6.3 Discreetness of data saving may be set up without limits 6.4 Export of log-files to Excel or Access 6.5 Alarm system in case of parameters are not correspond to preset parameters 6.6 Possibility of remote export of log files 6.7 For all parameters of the equipment there will be possibility of setting up of critical value of such parameters and further actions (means stoppage or further work with indication and information in separate log-file) with marks in log-files only in case of preset parameters will go beyond critical value. |
| 23 | UPS |
------------FAQ----------------------------------------------------
Q: What we can do for you?
A: Total SMT Machines and Solution, professional Technical Support and Service.
Q:Are you a trade company or a manufacturer?
A: OEM & ODM service are available.
Q: What is your delivery date?
A: The delivery date is about 35 days after receipt of payment.
){kind=link}