GDK 6 head Chip Mounter high speed smt pick and place machine for production line with CE certificate
Product's Introduction:
To fulfill both new and old customers' needs, we Jida Technologies Co., Ltd. presents to you the latest model of pick & place machine. After years of developing and skills we had, this pick & place machine contains stability with long term producing process, and results with high performance. It can not only mount devices with high accuracy such as 0402, 0603, 0805, 1206, 1210, LED devices, LED5050 packing devices, diodes, transistors, and SOT, but also include the following three new performances:
1) 5 million pixel camera is installed for higher accuracy and for checking the mistakes. With this camera is being used, it can easily mount chips that are smaller than 40 * 40 mm, and lead pitch at larger than 0.3mm. As a result, 98% of successful rate is been released in the report.
2) 6 industrial used camera is been installed for better identifying performance. It can works at the same time, in which saves more time , and works with better efficiency.
3) Automatic scan for the benchmark point, and automatic loader are been added to this model of pick & place machine. This addition makes the whole line of SMT process perform more effectively.
This model is now released to the market after the final testing was completely done. High performance, high stability, and easily configure is why this pick & place machine should be consumed.
Technical Parameters:
| Feeder Capacity |
64 |
| Number of Spindles |
6 |
| Average Power |
500W |
| Placement Accuracy |
0.01mm |
| Nozzle's Buffering Range |
4.5mm |
| Power Required |
220V, 50Hz |
| Pressured Air |
0.5 - 0.6Mpa |
| Operating Motor |
Panasonic servo motor |
| Identifying Method |
6 cameras (same time) |
| Nozzle's Vacuum Source |
Provides a high speed vacuum ejector |
| Max. PCB Size |
510*450mm |
| Max. Z-axis Operating Range |
20mm |
| Feeder Type |
tape feeder ,stick vibration feeder(tube chips is mountable) , Tray feeder |
|
| place Speed (Optimum) |
14800 CPH |
| XYZ-axis Motion Track |
TBI high precision overloaded straight line track |
| Driving System |
Panasonic's high speed DSP driver |
| Operating System |
Company own developed operating system supports windows xp and 7 |
|
| Component Angle |
0- 360 degree, able to spin while moving |
| XY-axis Moving Mode |
AI, curve, speed up , slow speed, straight line, multiple movements |
|
| mark Point Positioning |
Fully Automatic calibration |
| AI Signal Warning |
Location, components, feeders are irregular or out of sources |
|
| PCB Loading Method |
PCB Flow: L -> R or R -> L , supports SMEMA other machine's connecting |
|
| Visual Display |
LCD |
|
| Programming Method |
point by point, visual programming, PCB documents import, offline programming etc. |
|
| Number of Identifying Camera |
fiducial mark camera*1, high speed camera*6, Fix camera(high resolution) *1 |
|
| Available Components |
0402, 0603, 0805, 1206, diode, transistor, SOT, and BGA that are 40*40mm not having leading pitch lower than 0.3mm |
|
|
| Weight |
580kg |
| Dimensions |
1450*1370*1550mm |
Internal Structure of the Machine:
1.Housing 2.Placement Heads 3.Pneumatic Support Bar 4. Flexible Silent Cable Carrier 6.Servo Motor of Y Axis 7.Ground Ball Screw of Y Axis 8.Servo Motor of X Axis 9.Linear Motion Guide of Y Axis 10.Linear Motion Guide of X Axis 11.Ground ball screw of X axis 12. 5MP HD Camera 13.1MP Fast HD Camera 14.Feeder Slots 15.Anti-Collision Sensor 16.Waiting Area 17.Mounting Area 18. Exiting Area 20. Base
1, Standard settings includes display monitor and mouse, along with XP or Windows 7 operating system, Humanity configuration system and supports visual programming, and documents import for PCB.
2, * Fully automatic: After the PCB is being printed, it can automatically delivered and loaded to the pick & place machine, with auto position adjustment and the pick & place process.
*Tons of Feeders: Total of 64 feeder slots available ready to work. Asides from that, standard IC tray, tube chips, vibrate transistor's size can be modified in any standard.
*8 cameras: 1 for identifying benchmark point, 1 for high precision, and 6 for high speed identifier, guarantees the high speed and precision, along with 16 standard high precision nozzle from Juki.
3, Six camera excellence performance in synchronize mode
4, Panasonic server system, which is well known as high precision, high standard of stability, never disappoints customers, guarantees performing in a high standard even if works in 24 hours.
5, High Pressured Cable Drag Chain- uses imported brands chain that works for million times.
6, Taiwan's TBI results in highly precision, low noise, and high accuracy. Guarantees 0402 and BGA's mounting accuracy.
Company information:
HTGD (GDK) is committed to take the professional line, to enrich the SMT professional and technical service experience, process improvement and effective solutions, rich practical experience to provide customers with appropriate and economical and reliable recommendations to meet the special needs of all types of customers. The company established a head office in Shenzhen and set up branch offices in Dongguan, Suzhou, Tianjin, Chongqing, Xi'an and Xiamen. At the same time, there are many branches and agents overseas, forming a strong distribution and service network in the world.
Major application range is SMT & PCB assembly, consumer electronics products, auto industry, LED assembly, medical electronics industry, etc.
# Research and development Full automatic screen printer start in 2008
# In 2011, HETIANGOOD company was formally registered and establised
# 15 years experiences in SMT industry.
# 200+ empolyees, 2000 sets machine capability each year. (HTGD, GDK brand), ISO certified company, CE approval for the machine.
# Office area of 8000 square meters, modern, concise, rich sense of science and technology
Production line:
10000 square meters standard modern standard precision equipment production work
After-Sales service:
Technical support
# From the purchase date, one year free warranty, lifelong maintenance
# Provide technical update and technical service at any time
# Software system life - long free upgrade, to ensure the latest version of the software and perfect functions
# Provide technical training according to customer needs
Service support
# Since the date of purchase, the customer has become a lifetime member of our company and enjoys the all-day waiting service
# Make phone calls and on-site visits to customers from time to time, communicate with customers and improve related problems in a timely manner
# Provide door-to-door service, one - on - one designated service policy
Advantage, Why choose us:
1. GDK,HTGD Self-branded famous manufacture around the world
2. Self developed and owned software, Company industry experience
3. 2000 sets production capability per year
4. CE,ISO,TUV certified company
5. We have many years of SMT sales, installation and after-sales service experience.
6. We have exported the whole line of SMT equipment in North America,South America, Europe, Southeast Asia, Middle East and other countries. Many of them are new customers starting from scratch.
7. We assist customers to train professional technicians and provide technical support at any time.
8. We solve all SMT problems for our customers.
Other Products support:
SMT whole line support
We provide SMT equipment and solutions for the whole line.
Customer Visiting:
Customer Site:
Exhibition show:
Packing: VACUMME +WOODEN BOX.
------------FAQ----------------------------------------------------
Q: What we can do for you?
A: Total SMT Machines and Solution, professional Technical Support and Service.
Q:Are you a trade company or a manufacturer?
A: OEM & ODM service are available.
Q: What is your delivery date?
A: The delivery date is about 35 days after receipt of payment.
Audited Supplier 
){kind=link}